Fibre filled & Feather filled cushions can have a short life in the modern home. Constant puffing up of the cushions is a chore many people would like to avoid, yet they would still like to retain the look of the puffed up cushion rather than the 'block' look of a standard foam cushion.
We manufacture cushions to fulfill that criteria. High density foam cores with soft fibre wraps achieve the puffed up cushion look and ensure cushions rapidly return to their original shape.

Measuring the covers when replacing feather & Fibre Filled Cushions with foam and polyfibre wraps can be notoriously difficult. Rather than just placing an order on-line we suggest that to ensure that the new inners are a perfect fit in your covers it is a good idea to post us an empty cover (by either Recorded Delivery or Royal Mail Special Delivery). Upon receipt we will contact you with a quote for the varioue grades and our recommendations. If acceptable to you we can process your order over the phone (01926) 832775. If you prefer not to go ahead with the job we return the cover(s) to you immediately without any obligation or sales preasure.

If you would rather not post us your covers; below is a step by step guide from the measuring of a cover to the fitting of the new inner. We hope this will help you when measuring your own covers, choosing the most suitable grade of foam for yourself and to understand how the new inners are made.

	First of all measure the empty cover, do not stretch the cover too much, just lay it flat and measure between the seams or piping.
	Also measure the front to back measurement of the empty cover, again do not stretch the cover too much, just basically lay it flat and measure between the seams or piping.
	Measure the height of the cover between the seams or piping. This is most crucial, despite metrification most cushions are still produced in imperial sizes. By far the most popular depth of border for sofa/armchair cushions is either 4" or 5". When taking this measurement give the cover a little stretch, if it is not 4" or 5" please give us a call (01926) 832775. Many people make the mistake at this point of having taken the depth to be the height of their cushion with it's original filling still in place, working from the empty cover is most important.
	We then cut the foam at the sizes given by measuring as above. The grade of foam will depend on the hardness or softness you prefer the cushion to have. The most popular grade when replacing feather or fibre filled cushions is our Reflex grade as it allows you to still sink into the cushion but springs back to full height as soon as you get off the cushion. Also quite popular for people who prefer a firm cushion are our medium/firm and high/firm foams. The medium/firm foam is a 33 kilo density foam whereas the high/firm is a 40 kilo density foam. Both foams will initially feel practically identical but the high/firm is a higher density foam and will last longer in any given situation compared to the medium/firm.
	We then cover the foam with a heavyweight (14oz) polyfibre. When ordering on-line you need to choose the 14oz polyfibre wrap option from the Extras column. This polyfibre is about 1.5"/4cm thick and hence will make the finished new inner look bigger than the empty cover. DON'T PANIC, it will fit in the cover.
	The polyfibre is glued onto the foam and the edges are sealed. You can see from this picture how much the polyfibre increases the size of the cushion, this is why it is important not to stretch the covers when measuring them.
	A stockinette cover is the stretched over the cushion. We will fit stockinette covers where possible. Basically they will stretch to fit practically any sofa or chair cushion but they will not stretch to fit say a double bed size. The stockinettes are fitted automatically free of charge when ordering the polyfibre wrap.
	The new cushion is then fitted into the cover. We always think that this is one of the games they should have had on the Generation Game! In practically all cases you will have to bend the foam in half to get it into the cover. Slowly working the new cushion in a few inches each side at a time is the key to success. If you have posted us your covers we will have done this for you free of charge.
	The new foam cushion in the cover probably looks better than when it was new. The heavyweight polyfibre wrap gives the cushion that rounded, domed look and yet the foam core means goodbye to having to puff the cushions up.
	This picture of the border of the cushion shows you just how much higher the cushion is in the centre than at the edge. Also the border is nicely filled out and not baggy. If you feel confident that we can achieve this for your cushions from your measurements then get a quote now. If you don't feel that confident then post us your covers and we will do all the work for you. Jordans Foam Cushion 14 High St Leamington Spa CV31 3AN

---

Contact Details | Instant Quotes & On-line ordering | Types of Foam | Memory Foam Beds
Upholstery supplies & tools | Memory Foam Mattress Topper | Memory Foam Beds

---